UKI Architects, Helsinki (FI)

Le bâtiment d’exposition Pro Nemus du Metsä Group est un ensemble fabriqué à partir de bois finlandais; une fusion de la construction en bois industrielle moderne et de la menuiserie finlandaise. Le bâtiment est un lieu propice à la contemplation tranquille au milieu d’une zone industrielle massive. Combiné à une exposition interactive, c’est une expérience mémorable.

Le centre Pro Nemus est situé à l’usine de bioproduits du groupe Metsä à Äänekoski. Le bâtiment est censé être un centre d’accueil des visiteurs et un espace d’exposition pour les produits, les valeurs et les activités de Metsä Group. Situé près de l’entrée du moulin, le bâtiment accueille les visiteurs avec une forme sombre qui se démarque clairement des autres bâtiments du site. Le bâtiment en bois de mille mètres carrés rend justice à la diversité des produits en bois d’ingénierie de Metsä Wood. La structure associe des éléments en bois de fabrication industrielle, des solutions architecturales uniques et un savoir-faire en menuiserie. L’objectif était d’intégrer les structures du bâtiment et d’autres matériaux en bois à l’exposition et de les mettre en valeur le plus fidèlement possible.

Pour trouver l’inspiration pour les contours du bâtiment, les architectes ont examiné de près le site et les vues qui s’ouvrent sur celui-ci et ont examiné la manière dont les gens se déplaceraient à l’intérieur et à l’extérieur et découvriraient le bâtiment. Les caractéristiques et les contrastes de l’installation jouent un rôle important et soutiennent l’exposition: bas-haut, lumière sombre, fermé-ouvert, non éclairé. Le bâtiment lui-même est comme une promenade dans les bois: parfois les arbres s’y insèrent et seul un rayon de soleil occasionnel parvient à l’intérieur. D’autres fois, les arbres sont clairsemés et la forêt est plus claire, même dans une clairière.

La façade du bâtiment est composée de panneaux d’épicéa verticaux traités au vernis noir. La grande façade en verre, visuellement attrayante, se fond dans l’environnement du moulin. La rampe d’entrée attire les visiteurs vers la porte principale située sous un surplomb rappelant des branches d’épicéa. La porte en pin rappelle les traditions de l’artisanat et permet d’entrer dans une expérience digne.

Le foyer qui s’ouvre de la porte d’entrée est clair et lumineux. Doublé d’un mur de verre, l’espace s’agrandit et s’élève progressivement pour le rendre plus festif. Les structures massives en bois aux couleurs naturelles, fabriquées à partir des produits Kerto® LVL, associées à des surfaces blanches simples créent une atmosphère calme et chaleureuse. Les motifs CNC usinés dans les surfaces en contreplaqué de bouleau des escaliers en bois du hall mettent également en lumière le thème de la forêt et améliorent l’acoustique de l’espace grâce aux panneaux acoustiques cachés derrière eux. Un mur végétal recouvert de mousse ferme l’espace de l’exposition, ajoutant un élément coloré et impressionnant au bâtiment.

Les vestiaires et les toilettes au rez-de-chaussée ont un ton sombre, mais leurs surfaces en contreplaqué de bois résineux verni ont toujours un aspect naturel. Le plafond du rez-de-chaussée est fait de nervures en LVL, les lumières s’entrecroisant entre elles. Il manque un panneau acoustique derrière les nervures en bois. Les bancs sont fabriqués à partir de Kerto® LVL et les portemanteaux en contreplaqué de bouleau et de résineux. La texture vive du contreplaqué et du Kerto® LVL a été gardée aussi naturelle que possible en apparence et en toucher.

L’accès à l’espace d’exposition au premier étage se fait par un escalier en bois. L’espace et les matériaux de la zone d’exposition sont ininterrompus et complexes, ce qui rend le bâtiment cohérent. En regardant de la galerie au foyer, l’installation artistique dans le hall et le mur végétal au bout de l’espace peuvent être explorés sous différents angles. Le moulin situé de l’autre côté de la paroi de verre fonctionne également sous un nouvel angle.

Les portes coulissantes et le mur à la fin de l’espace d’exposition du premier étage sont fabriqués dans le même matériau que la façade. Les larges portes coulissantes permettent de combiner l’espace polyvalent avec le rythme des expositions ou de le fermer pour des événements plus privés. La flexibilité des installations et le cycle de vie du bâtiment ont été des considérations importantes: l’espace d’exposition et la disposition peuvent être modifiés en fonction des besoins.

Le centre Pro Nemus est un exemple type de la rapidité avec laquelle des projets de construction en bois peuvent être réalisés. Le calendrier extrêmement serré a été respecté sans compromettre la qualité et les détails. La structure en poutres de piliers du bâtiment et le mur, le sol et le plafond reposent sur les produits Kerto® LVL. Grâce aux éléments préfabriqués, le centre d’accueil des visiteurs a été construit en seulement sept mois.

Programme: Centre d’accueil / bâtiment d’exposition
Calendrier: achevé en 2018, temps de construction de sept mois
Propriétaire de travail / client:
Client: Metsä Group
Développeur: Fimpec Oy
Architecte: UKI Arkkitehdit Oy, architecte Ulla Passoja & architecte Cláudia Antão
Ingénierie du bois: Sweco Rakennetekniikka Oy
Entreprise principale: Rakennustoimisto Alonen Oy
Entreprise (s) de construction en bois:
Matériaux de construction en bois: Metsä Wood, VVR Wood Oy
Plafonds intérieurs et éléments de mur: Hietaranta Oy
Porte-manteaux et bancs en bois: Palokan Puutuote Oy
Panneaux de façade: Siparila Oy
Parquet: Carélie-Upofloor Oy
Surface:
Volume: 5 590,5 m3
Surface de plancher: 1 029,5 m2
Surface brute: 1 034,9 m2
Systèmes de construction: éléments en bois préfabriqués

———-

UKI Architects, Helsinki (FI)

Metsä Group’s Pro Nemus exhibition building is an ensemble crafted from Finnish wood; a fusion of modern industrial wood construction and Finnish carpentry. The building is a place for quiet contemplation in the middle of a massive industrial area. When combined with an interactive exhibition, it is a memorable experience.

The Pro Nemus centre is located at the Metsä Group bioproduct mill in Äänekoski. The building is meant to be a visitor centre and an exhibition space for Metsä Group products, values, and operations. Located near the entrance to the mill, the building welcomes guests with a dark form that clearly stands out from the other buildings on the site. The thousand square metre wood building does justice to the diversity of Metsä Wood’s engineered wood products. The structure combines industrially manufactured wood elements, architecturally unique solutions and carpentry expertise. The aim was to incorporate the building’s structures and other wood materials into the exhibition and to highlight them as authentically as possible.

To find inspiration for the contours of the building, the architects took a close look at the site and the views that open out from it and considered how people would move inside and outside and experience the building. The features and contrasts of the facility play an important role and support the exhibition: low-high, dark-light, closed-open, unlit-lighted. The building itselfis like a walk in the woods: sometimes the trees press in and only the occasional sunbeam finds its way inside. Other times the trees are sparse and the forest is brighter, even opening up into a clearing.

The building facade is made from vertical spruce panels treated with black varnish. The visually pleasing large glass façade blends into the mill environment. The entrance ramp pulls visitors towards the main door that is under an overhang reminiscent of spruce branches. The pine door recalls traditions of artisanal craftsmanship and makes entering a dignified experience.

The foyer opening up from the front door is light and bright. Lined with a glass wall, the space gradually expands and rises, making the space festive. Massive wood structures in natural colours, made from Kerto® LVL products, combined with uncomplicated white surfaces create a calm and warm atmosphere. The CNC patterns machined into the birch plywood surfaces of the wood staircases in the foyer also spotlight the forest theme and improve the acoustics in the space due to the acoustics panels hidden behind them. A green wall covered with moss closes off the expanse of the exhibition space, adding a colourful and visually impressive element to the building.

The cloak rooms and toilet facilities on the ground floor have a dark tone, but their varnished softwood plywood surfaces still have a natural feel. The ground floor ceiling is made from LVL ribbing, with the lights weaving in and out between them. There is lack acoustic panel behind the wood ribbing. The benches are made from Kerto® LVL, and the coat racks are made from birch and softwood plywood. The vivid texture of the plywood and Kerto® LVL has been keptas natural as possible in appearance and feel.

Access to the exhibition space on the first floor is through a wooden staircase. The space and materials in the exhibition area are uninterrupted and c lear, making the building a cohesive whole. Looking down from the gallery to the foyer, the art installation in the foyer and the green wall at the end of the space can be explored from different angles. The mill on the other side of the glass wall also op ens up in a new way from this perspective.

The sliding doors and the wall at the end of the first floor exhibition space are made from the same material as the facade. The wide sliding doors allow the multipurpose space to be combined with the exhibitions pace or to be closed off for more private events. The flexibility of the facilities and the life cycle of the building were important considerations: the exhibition space and layout can be modified as needed.

The Pro Nemus centre is a model example of how quick wood construction projects can be. The extremely tight schedule was met without compromising on quality and the details. The pillar-beam frame of the building and the wall, floor, and ceiling rely on Kerto® LVL products. Thanks to the pre-fabricated elements, the visitor centre was built in just seven months.

Program: Visitor Centre /Exhibition Building

Schedule : Completed in 2018, construction time seven months

Owner of work/ client:

Client: Metsä Group

Developer: Fimpec Oy

Architect: UKI Arkkitehdit Oy, architect Ulla Passoja & architect Cláudia Antão

Wood engineering: Sweco Rakennetekniikka Oy

Main enterprise: Rakennustoimisto Alonen Oy

Wood Construction Company (s):

Construction wood materials: Metsä Wood, VVR Wood Oy

Interior ceilings and wall elements: Hietaranta Oy

Coat racks and wood benches: Palokan Puutuote Oy

Façade panels: Siparila Oy

Parquet: Karelia-Upofloor Oy

Area:

Volume: 5 590,5 m3

Floor area: 1 029,5 m2

Gross area: 1 034,9 m2

Construction systems: prefabricated wood elements

Wood type (s): Kerto ® LVL, birch and softwood plywood, spruce panels

Label (s) or certification (s):

Photographs: Mikko Auerniitty

Drawings: UKI Arkkitehdit Oy

Leave a Reply

Your email address will not be published.

*